How To Get Tough Stains Out Of Bathtub

How To Get Tough Stains Out Of Bathtub – Nothing ruins a relaxing bath time like a nasty, nasty stain on your shower floor or tub. With constant exposure to hard water, soap, mud, and all kinds of dirt, this area is prone to stains. And the longer you ignore the problem, the worse it gets. Fortunately, there are some simple solutions for removing stubborn stains from your bathroom. Read on to learn more!

There are a few different methods you can use to remove stains from your shower or tub.

How To Get Tough Stains Out Of Bathtub

How To Get Tough Stains Out Of Bathtub

You may notice that different types of stains may appear on the shower or bathtub. Each color indicates a different root. The method you use to clean the stain may vary depending on the color. Here are some of the most common colors and their causes:

Simple Steps To Clean A Bathtub With Sparkling Results

Let’s take a look at some of the ways you can try to get rid of those pesky bathroom stains. There are many tried and true methods to try. Some you can even accomplish with tools you may already have at home!

Before doing anything else, try your regular cleanser. Let your cleanser sit for 10-15 minutes, then add some elbow grease to remove the stain. Most of the time that will do the trick. However, if you want a simple, less invasive cleaning solution, proceed with the methods below.

Make a mixture of one part hydrogen peroxide and two parts baking soda. Apply the paste and leave it for at least 30 minutes. Then wash with a sponge or nylon brush and rinse with warm water. This works best with red or black. But avoid using this method on acrylic bottles. It can be scratched up.

Fresh lemon juice is a powerful tool for fighting red and brown rust. First, put salt on the area. Now use lemon juice. Do not soak the solution for more than 5 minutes – longer can cause damage due to the preservative in the lemon juice. Clean the stain and voila! Good as new!

Simple Bathtub Cleaning Tips For Totally Gunky Tubs

Remove yellow stains with soapy water and vinegar. It’s also a great choice for sensitive surfaces like acrylic bottles. Fill a plastic bottle with vinegar. If you want to improve the smell, you can add a few drops of essential oil. Apply a generous amount of vinegar to the stained area. After 20 minutes, clean the stain with a sponge.

A “magic” towel or melamine sponge is a good choice for tough bathroom stains. These are good for all types of stains but especially effective for rust and blue-green stains. Just wet the sponge and remove the stain. It’s a good idea to pre-clean your tub with your regular cleanser before using the magic towel. However, we do not recommend the use of this tool on installed panels that may damage the surface.

The best way to prevent stains is to clean your bathroom regularly. Ideally, you should clean your bathroom every day. However, we understand that this is not necessary for many busy, working adults. Clean your shower once a week to avoid serious stains on the shower and tub.

How To Get Tough Stains Out Of Bathtub

Do you need help keeping clean? Clean beans are ready and can be your companion in cleaning the house! If you are in the Fort Collins area, contact us to learn more about our professional cleaning services!

How To Clean A Bathtub

Interested in joining our hive? We are always looking for new team members! Read more about working at Clean Bees here! Q: When we removed the rubber mat from my son’s bathtub, we found black stains. Efforts to clean it with the mold and the circle with the soft brush and the noise were futile. The tub was installed in 2005, but we recently noticed the stain. No color is used in it. How can we remove the stain?

A: Fiberglass pipes and shower trays are lightweight, which makes them easy to install, and they are often inexpensive. But the finish is prone to scratches, cracks and stains. And, as you have discovered, it is not easy to remove the stain.

Before you give up trying to remove the stain, try this cleaning method that Home Depot recommends for tough fiberglass stains: Mix baking soda and water and cover with a damp cloth. soak in vinegar. Wait for an hour and then rub with a cloth or sponge. Wash. Dry again with a clean microfiber cloth.

If the stain persists (and there is a good chance), one option is to repaint the tub. National Refinishing in Chantilly (703-327-4799;, which specializes in bathroom and kitchen refinishing, has several “before” photos on its website. Sites that show stained fiberglass tubs are worse than your shower. The “after” photos show the shiny results of the new finish, but the photos were actually taken when the finish was new. National Refinishing and other bathtub refinishing companies also give the tub a new look by sealing it with epoxy acrylic. National Refinishing charges $425 for just the tub or $995 for the tub and shower. If you have a tub surround, the company can paint it with a rubber liner and similar materials.

How To Clean Bathtub Stains (diy)

Having a tub professionally painted costs about the same as buying a new tub – or more, if you base the cost of a tub new to the budget model. At Home Depot, for example, a 60-inch long tub starts at about $155 if you buy one with porcelain enamel over the metal, or about $254 if you opt for a button. But when you replace a bathtub, cost is only part of the equation. Unless you are handy enough to do the job, you will need to hire people to do the switch, including a plumber to do the wiring. And some work may be needed to fit the new tub to the tub or whatever is on the walls surrounding the tub. Given these costs, it is more important to install a new tub as part of a bathroom renovation than to leave it alone as a way to deal with stains.

If refinishing is necessary but the cost is too high, consider using a DIY shower kit to refinish it. A Rust-Oleum bath and shower tray is $23.70 at Home Depot. One box should be enough for the recommended two coats on a standard tub.

But will it complete a DIY? Home Depot’s online catalog includes reviews from nearly 1,300 customers, who received an average rating of four stars, and nearly half of reviewer was awarded five stars. But at least 170 people gave it only one star. They often complain about the finish being loose or not sticking well. A Rust-Oleum representative, who gave his name as Arthur, said when problems occur, it’s usually because the surface hasn’t been properly cleaned or sanded first, according to the instructions, or because one made all things. get rid of things. Leftover before you apply a new finish. Sometimes people wash the back too far or apply a thick coat, which can prevent proper drying, he said. Relative temperature and humidity are also important.

How To Get Tough Stains Out Of Bathtub

Professional refinishers spray on a new finish, which, if done correctly, results in a coating. Rust-Oleum recommends applying its finish with a brush or ¼-inch roller, so a good paint job is needed to get a smooth coat. , and the same. The product support specialist recommends starting in the back corner and working forward in small sections, maybe two feet by two feet. Bubbles can appear immediately after, but they end up being self-destructive, so they should disappear while the four are solid. results. But if the finish separates after you use it, something went wrong in the preparation. Stop and check before you cover the entire tub.

Bathtub Stains….how To Get This Out??

A representative from Rust-Oleum said the DIY finish should last several years. At that time, you can repeat all the previous steps and apply another coat or two of finish, he said.

If it seems like too much work for the expected life of the finish, or if you don’t want to do the work in the first place, you can try something else: buy a new rug for the floor the taboo and covering it. Scars are invisible, mindless — until it’s time to do it again. We certainly don’t want to get into a tub that looks dirty and dirty, and you probably don’t either.

There are ways to remove all types of bathroom stains. Whether your bathtub is made of enamel, acrylic, porcelain, or something else, we have recommendations. This includes removing soap scum, hard water stains, rust and many other nasty stains that can build up in your tub.

It is important to note the contents of your bathtub. Everything has dos and don’ts when it comes to cleaning. This ensures that you don’t damage your bathtub.

Bathtub Cleaning Hacks For Quick & Easy Sparkle

Enamel tiles are usually made of porcelain enamel – a powdered glass bonded to steel. Here you go

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments